|
|
5 year warranty
Our timber flooring carries a 5 year warranty and our personal guarantee that should any problems arise, we will come back and fix them.
|
What to expect from 4 Star Flooring
When getting your timber floors sanded and finished by a professional applicator, you may need to do a little preparation beforehand. Here is a list of things you should do to make sure that your floors are ready to be given a fresh new look:
Food for thought on your professional floor sanding job:
- Ensure you know when the start and end dates should be for the floor sanding and coating job, this is important if you're building or renovating your home and are doing other work on the home as well.
- Your timber floor work should only be started after all other electrical, carpentry, plastering, plumbing and glazing work has been completed.
- We also recommend finishing any and all painting (except for the final coat on skirting boards) before beginning on the floors. The final coat for skirtings may be done after the floors have been sanded and coated.
- Be wary that any silicone or silicone based product that come into contact with the floor after sanding, but prior to any of the 3 coats have been done, will result in the coatings being rejected. Silicone can often be found on the footware of plumbers and glaziers.
- Don't lay out any carpets until after the floors have been finished.
How to prepare for your sanding and coating job:
- Generally (unless prior arrangements have been made) you are required to remove all furniture, along with all floor coverings including staples, tacks and other items.
- Ensure that adequate lighting and power will be available for the applicators and their equipment.
- Provide clear and safe access to the site for the workers.
What to expect for your flooring finishes:
- We will provide a detailed explanation of the work to be completed included in the quote so you can be sure you know what is going to happen.
- Our expert floor sanders will give a professional sanding and coating job.
- The floor nails will be punched.
- We will fill all nail holes, knot holes and gaps at the end of boards with the appropriate filler.
- A coating that will provide many years of beauty, provided it is properly maintained.
What not to expect for you newly polished floor boards:
- Your environment to be completely dust free. While we use the best modern sanding machinery that is fitted with dust collecting equipment, it is next to impossible to clean away all the dust. Our equipment will try to clean away as much of the dust as possible, but there will be a few resulting consequences due to the difficulty in getting rid of all the dust:
- there will always be some dust particles that settle on the newly finished surface.
- there will be an amount of dust throughout the rest of the house.
- Removal of deep cuts from the timber floor boards. Deep cuts could be caused from carpet trimming knives.Stain removal from within the floor boards and around nail holes.
- Gaps to be filled inbetween the floor boards. The reason for this is because subsequent shrinkage and expansion in the timber will cause cracking in the filler.
- Areas filled with putty to have the same feel of the rest of the timber.
|
|
|
Get a free quote
Fill out the form below and we will contact you within 3 hours* to discuss your needs and arrange a time for a quote.
|
|
|